Walk-On Safety Nets

A safe & cost-efficient walkable platform, a superior alternative to scaffolding for access at height.

Engineered Solutions —

Walk-on safety nets – a safe & cost efficient walkable platform

Walk On Nets are also known as tensioned access platforms or work platform nets and are increasingly becoming recognised as a safe and superior alternative form of access over traditional solutions such as scaffolding for certain tasks and where MEWP access is unavailable.


Walk-On Nets provide a walkable work surface that is a cost-effective alternative in comparison to scaffolding systems. They are lightweight, low-impact, and can be installed under deck areas, bridges, tanks and almost any large structure or span. They can also be used in conjunction with rope access and any other fall arrest setup to ensure total worker safety and job site efficiency.


Walk On Nets also provides a suitable work platform for many types of work tasks, such as surface prep and coating application, inspection, steel repair and pipework installation or repair.

Benefits of Walk On Nets

Speed of installation over scaffolding

Substantially less equipment to transfer through occupied buildings

Reduced hours working at height

Clear area beneath for other trades to operate

Significant cost savings

Less obtrusive than a large scaffolding structure

Reduced carbon footprint

Lightweight and low-impact installation

— APPLICATIONS —

Where walk-on nets are used

Walk On Nets provide a safe, walkable work surface under deck areas, bridges, tanks and almost any large structure or span.

01

Under Deck Areas

Walk On Nets installed under deck areas provide safe walkable access for inspection, repair and maintenance where traditional scaffolding would be impractical.

02

Bridges & Tanks

Suitable for large structures and long spans such as bridges and tanks, where MEWP access is unavailable and scaffolding would be cost prohibitive.

03

Surface Prep & Coating

Provides a stable work platform for surface preparation and coating application at height, allowing unrestricted movement for the workforce.

04

Steel & Pipework

Enables steel repair and pipework installation or repair at height, with a walkable surface that eliminates the need for running lines.

— Technical Specifications —

Mesh, Grid & Standards

UV stabilised, tear-resistant and load tested. Walk On Nets are manufactured to BS EN 1263-1 with a Class B 4.4kJ specification.

45/60

Mesh Specification

Constructed of 45mm or 60mm net material with tensioned webbing straps woven through the mesh to form a strong, stable walkable surface.

2×2m

Tensioned Grid System

Webbing straps form a 2m x 2m tensioned grid through the mesh, allowing users to walk around and carry out light duty tasks in complete safety.

B 4.4

BS EN 1263-1 Class B

Manufactured to BS EN 1263-1 standards with Class B 4.4kJ specification. UV stabilised, tear resistant, load tested and certified.

System Overview —

Engineered for Your Project

The Walk On Net system is specifically designed and engineered for a project, with the task to be carried out taken into consideration. The system is designed in such a way as to reduce any sag to an acceptable level when in use.


Systems are normally installed with a fall arrest safety net and a debris containment membrane beneath. This has the dual benefit of encapsulating the workspace — allowing work to continue below, and disguising the feeling of exposure for users.


The safety nets also offer collective protection to the users and allow unrestricted movement for the workforce by eliminating the need for running lines.

Being a textile system, Walk On Nets are very lightweight, cost-effective and massively reduce man-hours working at height through the installation and removal process.

Mounting & Installation

The system is mounted onto a structure in a variety of ways, including webbing slings, chemical anchors or through bolts — the specific method will be specified at the survey stage, but the possibilities are endless.


Nets are quickly and efficiently installed with the help of our certified riggers. The walk-on netting sits above a fall arrest safety net and debris containment membrane, providing both a working platform and collective protection for the workforce below.


The fall arrest net beneath provides collective protection and eliminates the need for running lines, allowing the workforce to move freely without individual restraint systems.

Walk On Nets provide a safe, cost effective alternative to scaffolding — massively reducing man hours working at height and the amount of equipment required on site.

— Our commitment —

Safety Nets NZ Benefits Your Project

Add a significant level of protection and efficiency to every job with a walk-on safety net system. Safety Nets NZ leaves you free to concentrate on what you do best.

Full Design Service

Safety Nets NZ provides a full design, installation & certification service for walk-on safety net systems, leaving you to carry on with peace of mind.

Compliant Systems



All systems are manufactured to BS EN 1263-1 standards and meet relevant New Zealand safety and building compliance requirements.

Certified Installers

Our nationwide team of FASET-trained certified riggers ensure every walk-on net system is installed professionally and to the required standard.

— How it works —

Our all-inclusive process

01
Site Assessment
We visit your site to assess the access requirements, structural attachments, and specify the appropriate walk-on net system for your project.
02
Design & Engineering
The system is specifically designed and engineered for your project, with the task to be carried out taken into consideration. Mounting methods are specified at this stage.
03
Fabrication
Nets are manufactured to BS EN 1263-1 standards with the specified mesh size, tensioned webbing grid, and mounting hardware.
04
Installation & Certification
Our FASET-trained riggers install the system quickly and efficiently. Full compliance certification is provided so your site is ready for work.

— FAQ —

Common questions

How does a walk-on net compare to scaffolding?

Walk On Nets are a lightweight, cost-effective alternative to scaffolding for access at height. They require substantially less equipment to transfer through occupied buildings, drastically reduce man-hours spent working at height during installation and removal, and leave a clear area beneath for other trades to operate. As textile systems, they are much less obtrusive than large scaffolding structures and have a significantly reduced carbon footprint.

What safety standards are walk-on nets manufactured to?

Walk On Nets are manufactured to BS EN 1263-1 standards with a Class B 4.4kJ specification. They are UV stabilised, tear resistant, load tested and certified. The system is constructed of 45mm or 60mm net material with tensioned webbing straps woven through the mesh to form a strong, stable, walkable surface. All systems are installed by our nationwide team of FASET-trained certified riggers, and full compliance certification is provided for every installation.

GET IN TOUCH

Discuss your walk-on net project

Safety Nets NZ ensures all your requirements are met with a safe, cost-effective walk-on net solution, at a realistic and competitive price. Contact us for a site assessment and quote.